CLAAS is replacing the AXION 800 series with three new large tractors from the AXION 8 CMATIC range. Featuring the new VISOR front design, these all-rounders impress with their new cab, with noise levels reduced to a maximum of 67 dB(A), premium seats and the new CEBIS connect terminal, as well as intelligent adaptive drivetrain management, efficient engines, the new CEMOS AUTO POWERTRAIN and future-proof digital connectivity. Claas claims that in combination with a Vehicle Control Unit (VCU), fully automated operation with pre-planned work orders is possible within the framework of driver-supervised Autonomy.
As the successor to the AXION 800 large tractors, CLAAS will launch the new AXION 8 CMATIC series in summer 2026. The three large tractors, with maximum power output ranging from 240 to 290 hp (264 to 313 hp with DYNAMIC POWER), take comfort, automation and connectivity to a new level, combining tried-and-tested technology with new, unique features and functions for efficient and economical use in fields, on grassland and on the road. Further optimized and well tried and tested hardware – such as the engine, transmission and axles – are combined with the new DYNAMIC POWER power management system, a completely redesigned cab, a new electronics infrastructure and new, intelligent driver assistance systems, right through to driver-monitored autonomy. Thanks to new tyre options, CEMOS AUTO POWERTRAIN with DYNAMIC POWER, AUTO DROOP and the innovative, Agritechnica award-winning adaptive driveline management system, CLAAS connect connectivity and the CTIC tyre pressure control system, the new AXION 8 CMATIC is always optimally equipped for any task.
In addition to their technical merits, these agile large tractors impress with individual MAXI CARE service contracts valid for up to 8 years and extended service intervals, as well as the new MAXI CARE FOCUS component warranty covering five years or 5,000 operating hours.
All AXION 8 CMATIC models are powered by the latest-generation NEF 6.7 six-cylinder engine from FPT, with a displacement of 6.7 l, a maximum power output of 264 to 313 hp and a maximum torque of 1,132 to 1,282 Nm. Peak power and maximum torque are available across a wide rev range and even at low engine speeds. The new DYNAMIC POWER dynamic power management system, part of the new CEMOS AUTO POWERTRAIN, intelligently and fully automatically adapts engine power to every operating situation and distributes it via the gearbox, power take-off shafts, hydraulics and auxiliary consumers precisely where it is needed at any given moment. The system continuously analyses electrical power requirements, optimises the settings and thus ensures high productivity and low fuel consumption at both full and partial load, thereby reducing operating costs. In combination with the CMATIC continuously variable transmission and AUTO DROOP (also part of CEMOS AUTO POWERTRAIN), which adaptively and automatically adjusts engine droop to conditions of use, this delivers more power with lower fuel consumption – without any extra effort.
During idling, the engine speed is reduced to 650 rpm – this saves fuel, provides relief to the environment and lowers the noise level when the tractor is stationary.
For easy and effective clearing, the cooling packages can be simply folded open; a reversible fan is fitted an option.[PF1.1] During operation, the optional reversible fan keeps the radiators free of dirt and dust. The engines are approved for operation with hydrotreated vegetable oils (HVO), which enables a reduction in the CO₂ footprint of up to 90 per cent.
With a view to cost-effectiveness and total cost of ownership (TCO), maintenance intervals have been extended, amongst other things. For example, oil changes are now scheduled every 750 operating hours instead of every 600, and the replacement intervals for the most important filters have been extended by 150 to 300 operating hours.
Smart power train with AUTO LOAD ANTICIPATION for maximum performance and driver comfort.
The AXION 8 CMATIC large tractors also rely on tried-and-tested, mature hardware when it comes to the continuously variable, power-split transmission. The electronic drivetrain management system, however, has been completely redeveloped and enables tuning optimised for performance, comfort and efficiency – with an even higher level of automation. This means that even less experienced drivers can operate at the highest levels of performance and efficiency across all areas of application. Depending on the tyres fitted, 40 km/h is achieved at an efficient 1,300 engine revolutions per minute, whilst 50 km/h is reached at just 1,400 rpm.
Just as with the larger AXION 9 CMATIC, drivers can use the new vehicle drive controller to switch smoothly between driving directions, as well as between pedal mode, joystick mode and PTO mode without any changes in engine speed or vehicle speed. In every driving mode, override via the ground drive pedal or the CMOTION is possible at any time without interruption – for truly stepless driving of the highest standard.
Protect against future costs: MAXI CARE Focus and MAXI CARE Protect for up to eight years or 8,000 operating hours.
Today, professional farmers and contractors want to safeguard their machinery costs in advance. With MAXI CARE Focus for the AXION 8 CMATIC, CLAAS offers a solution tailored entirely to customers’ needs. The new component warranty covering the engine, gearbox and front axle is valid for five years or 5,000 operating hours – at no extra cost.
MAXI CARE Protect goes a step further: this warranty extension covers all claims included in the statutory warranty for a period of up to eight years or 8,000 operating hours – including the cost of genuine CLAAS spare parts, operating fluids and repair work.
